Interfacing Blog Posts
![](http://cdn.comsol.com/wordpress/sites/1/2024/05/Blog_Header_Imgs_SurfaceMountDevices_ThumbnailImg.png)
Preconditioning of Surface-Mount Devices for Reliability Testing
Explore how modeling and simulation can be used to analyze the thermal stress and hygroscopic swelling of a surface-mount device through the 3 preconditioning stages.
![](http://cdn.comsol.com/wordpress/sites/1/2023/03/Blog_Header_Imgs_Onera_ThumbnailImg.png)
Validating Transonic Flow Results with the ONERA-M6 Wing Model
When using simulation software, your models’ results should accurately reflect the real-world phenomena you are simulating. 1 way to check this is by using a validation model.
![](http://cdn.comsol.com/wordpress/sites/1/2023/02/Blog_Header_Imgs_conductor_ThumbnailImg.png)
Combining Volumetric Conductor Models and Lumped Elements
With the AC/DC Module, it is possible to connect a full-fidelity volumetric conductor model to a lumped circuit element model. Learn how here.
![](http://cdn.comsol.com/wordpress/sites/1/2022/09/Blog_Header_Imgs_Topology_ThumbnailImg.png)
A Practical Implementation of Multiphysics Topology Optimization
A guest blogger from GN Audio A/S introduces a multiphysics topology framework developed with the COMSOL Application Programming Interface and LiveLink™ for MATLAB®.
![](http://cdn.comsol.com/wordpress/sites/1/2022/06/Blog_Header_Imgs_MetamaterialAbsorber_ThumbnailImg.png)
Modeling Graphene in High-Frequency Electromagnetics
Graphene exhibits a variety of interesting properties, including high elasticity and mechanical strength. In this blog post, we’ll explore how to model graphene in an electromagnetic simulation.
![](http://cdn.comsol.com/wordpress/sites/1/2022/05/Blog_Header_Imgs_SOLIDWORKS_ThumbnailImg.png)
Offline Synchronization for the LiveLink™ for CAD Products
As of version 6.0, you can synchronize files between COMSOL Multiphysics® and a CAD software when they are installed on different computers.
![](http://cdn.comsol.com/wordpress/sites/1/2022/04/Blog_Header_Imgs_Pump_ThumbnailImg.png)
FDA Benchmark: CFD Modeling of a Centrifugal Blood Pump
CFD modeling is increasingly being used in medical device development to analyze device safety and effectiveness, accelerate the development cycle, and reduce costs. See 1 example here.
![](http://cdn.comsol.com/wordpress/sites/1/2022/01/Blog_Header_Imgs_Plane_ThumbnailImg.png)
How to Compute the Projected Area of a CAD File in COMSOL®
Learn about three approaches to computing the projected area of a CAD file and when to use each one.