Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Help me to simulate angular velocity...
Posted 23 ott 2010, 06:12 GMT-4 2 Replies
Please login with a confirmed email address before reporting spam
I want to calculate the angular velocity of a turbine with an applied force on its blades. which modules do i need for this simulation?
THANX
THANX
2 Replies Last Post 23 ott 2010, 11:49 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Basic COMSOL should do, you need to use a calindrical coordinate system, and define a few variables. Part of this is done in the structural module. Anyhow if you enter a force you need some damping to get to a constant velocity to have an energy balance, otherwise it would never stop accelerating ;)
you have also the example of torque and moment load in the 3.5a structural doc that show how to define global equations, in V4 you have also the rigid connectors, and velocity as well as acceleration fields for temporal analysis
--
Good luck
Ivar
Basic COMSOL should do, you need to use a calindrical coordinate system, and define a few variables. Part of this is done in the structural module. Anyhow if you enter a force you need some damping to get to a constant velocity to have an energy balance, otherwise it would never stop accelerating ;)
you have also the example of torque and moment load in the 3.5a structural doc that show how to define global equations, in V4 you have also the rigid connectors, and velocity as well as acceleration fields for temporal analysis
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thank you but how I can get the angular velocity in postprocess level? I solved the it but I couldn't find the answer in the plots and data...