Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

what is the different of 'form an union' and 'form an assembly'?

Please login with a confirmed email address before reporting spam

Hi

in the Geometry setup, The Finalize node ends each geometry sequence. In the Model Tree, its label is Form
Union or Form Assembly depending on its settings. but is there anyone knows what is the different?

2 Replies Last Post 23 nov 2015, 08:47 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 nov 2010, 05:30 GMT-5
Hi

the default union mode groups and slit all geoemtric objects such that all interiour boundaries are unique and by default set up a continuous BC on these interiour boundaries.

The assembly mode (nothing to do with CAD assembly, what in COMSOL is called a composite object) groups the composites objects, or separate objects such that they remain with their respective boundaries, this means that you can end up with overlapping entities or dedoubled overlapping bouundaries.
Assembly mode is used particularly for contact physics, and if you want to add physics on the boundaries (that oerlap)

--
Good luck
Ivar
Hi the default union mode groups and slit all geoemtric objects such that all interiour boundaries are unique and by default set up a continuous BC on these interiour boundaries. The assembly mode (nothing to do with CAD assembly, what in COMSOL is called a composite object) groups the composites objects, or separate objects such that they remain with their respective boundaries, this means that you can end up with overlapping entities or dedoubled overlapping bouundaries. Assembly mode is used particularly for contact physics, and if you want to add physics on the boundaries (that oerlap) -- Good luck Ivar

Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 23 nov 2015, 08:47 GMT-5
Hello,
Regarding Form Union & Form Assembly, you will find this knowledgebase helpful:
www.comsol.com/support/knowledgebase/1216/
Hello, Regarding Form Union & Form Assembly, you will find this knowledgebase helpful: http://www.comsol.com/support/knowledgebase/1216/

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.