Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electric field lines mapping
Posted 22 dic 2010, 06:56 GMT-5 Low-Frequency Electromagnetics, Electrochemistry Version 4.0a, Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
I am new to COMSOL multiphysics software. I am doing electrospinning in which polymer nanofibers of the order of nanometer diameters are produced by applying a high voltage(of the order of 10-15 kV) at the tip of a syringe and collecting the fibers on a grounded collector of aluminium sheet which kept at a distance of 10-15 cm from the tip. Can anybody please help me to figure out the way to map the electric field lines from the syringe tip to the grounded collector.
Regards
Shareef
Hello Muhamed Shareef
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Try adding the electrostatics physics and add point charge for tip of needle and add rectangular shape for your aluminum collector. Add electric potentials and materials and you should be able to map the electric potential. Add "streamlines" to electric potential in results to see the field lines.
-Srujan.