Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Defining convergence

Posted 4 feb 2011, 04:39 GMT-5 Computational Fluid Dynamics (CFD) Version 3.5a 2 Replies

SM Ananth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,
How to define convergence for an unsteady fluid flow problem?Can anyone help me in this regard...
thanks
2 Replies Last Post 6 feb 2011, 13:49 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 feb 2011, 08:07 GMT-5
Hi

difficult to say in short, my experience, get the initial values close to the expected one (from simple analytical estimations)

--
Good luck
Ivar
Hi difficult to say in short, my experience, get the initial values close to the expected one (from simple analytical estimations) -- Good luck Ivar
SM Ananth
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 feb 2011, 13:49 GMT-5
Hello sir,

Thank you for your suggestion.

S M Ananth
Hello sir, Thank you for your suggestion. S M Ananth

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content