Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Defining material properties

Posted 9 mar 2011, 09:44 GMT-5 Materials Version 3.5a 2 Replies

Atilla Savas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi Everybody,

How can I define the following thermal conductivity in COMSOL 3.5a

k=10+0.0014*T if T<780
k=12+0.0013*T if 780<T< 1672
k=210-0.1*T if 1672<T<1727
k=8 +0.01*T if 1727<T

Is it possible to give conditional material properties?

If someone helps me, I will appreciate it a lot..

Thanks.

2 Replies Last Post 9 mar 2011, 12:14 GMT-5
Xiaogai Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 mar 2011, 10:34 GMT-5
Write it into logical expression should work?

k=(10+0.0014*T)*(T<780)+(12+0.0013*T)*(T>780&&T<1672)+(210-0.1*T)*(T>1672&&T<1727)+(8 +0.01*T)*(T>1727)
Write it into logical expression should work? k=(10+0.0014*T)*(T780&&T1672&&T1727)
Atilla Savas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 mar 2011, 12:14 GMT-5
Thank you,

I will try the logical expressions.

Thank you, I will try the logical expressions.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content