Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Wall bounday condition, Comsol 5.2a
Posted 11 ago 2017, 11:11 GMT-4 Computational Fluid Dynamics (CFD) Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
in the documentation for the wall boundary condition, I read:
Wall Functions
The Wall functions boundary condition replaces the no-slip condition on solid walls for certain turbulence models such as the k-ε and k-ω models. Wall functions are used to model the thin region with large gradients in flow variables near the wall.
When Apply wall roughness is selected, a Sand roughness model, derived from the experiments by Nikuradse, is applied. More general roughness types can be specified by selecting Generic roughness.
Can someone help me to find where is the check "Apply wall roughness" that enables the wall roughness?
thanks
Hello Daniele
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.