Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Time varying current over 2000 micro seconds
Posted 26 gen 2018, 03:45 GMT-5 Parameters, Variables, & Functions Version 5.3a 1 Reply
Please login with a confirmed email address before reporting spam
I am working to create a simulation of an electrode inside a peripheral nerve. In this simulation the electrode is supposed to stimulate the nerve with a rectangular wave. The electrode stimulates the nerve through a current spurce that we can control. It has a 200 us pulse at 30-90 uA followed by a 50 us interpulse at 0 followed by a 200 us pulse at -30--90 uA. This is then repeated over time. I'm trying to find a way to get the current run this way. I've created this function inside of COMSOL, and plugged the function into the Boundary Current Source for the Amplitude. However, I am not sure if it is operating correctly, and running at the correct rate. Thank you for any help you can supply.
Please login with a confirmed email address before reporting spam
Think like an experimentalist. Plot voltage as a function of time at an interior point; or define a surface, integrate current density over that surface, and plot as a function of time.
By the way, when doing time-dependent simulations many problems occur when you allow the solver free choice of time steps (usually the default in COMSOL).
D.W. Greve DWGreve Consulting