Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
linear extrusion COMSOL 4.0
Posted 24 giu 2011, 09:48 GMT-4 Geometry Version 4.0 0 Replies
Please login with a confirmed email address before reporting spam
so... I wana do a linear extrusion (3D geometry to 2D geometry), I have got '... illegal vertex...' error upon a run, here are my questions:
- in my 3D geometry, there are more than 100 vertices to choose, but I am only allowed to choose 4 as 'source vertices', I chose the four from each corner of the geometry in this sequence (top left, top right, bottom right, bottom left)
- in my 2D geometry (rectangular), I chose the only four vertices available in this sequence (top left, top right, bottom right, bottom left)
- am I doing it right so far?
- should I run the study of the 3D geometry or the one of the 2D?
Appreciate any inputs... thanks in advance!!
liwah
Hello LiWah Wong
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.