Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

"Failed to form solid object" Warning

Posted 26 set 2018, 21:01 GMT-4 General, Simulation Apps, Mesh Version 5.2a 1 Reply

Tiara Travis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Why does COMSOL give me this warning when I import geometry from Solidworks? I have the necessary licences and I am able to import, but cannot import an STL file as a solid, only a mesh. What must I do differently to import my geometry as a solid not a mesh?

Attachments:

1 Reply Last Post 27 set 2018, 09:15 GMT-4
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 27 set 2018, 09:15 GMT-4
Updated: 6 years ago 27 set 2018, 09:19 GMT-4

Hello Tiara,

My post in this thread applies here.

This blog post gives some more background on when stl format is suitable and when it should be avoided .

Jeff

-------------------
Jeff Hiller
Hello Tiara, My post in [this thread](https://www.comsol.com/forum/thread/109012/dimension-problem-when-importing-geometry-from-solidworks?last=2016-04-07T23:07:39Z) applies here. [This blog post](https://www.comsol.com/blogs/improved-functionality-and-tips-for-importing-stl-and-nastran-files/) gives some more background on when stl format is suitable and when it should be avoided . Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content