Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Analyzing the temperature increase inside the electrical cable as the alternating current flows inside the cable.
Posted 5 dic 2018, 02:22 GMT-5 Electromagnetics, Electromagnetic Heating, Low-Frequency Electromagnetics Version 5.3 2 Replies
Please login with a confirmed email address before reporting spam
Hi, I am modelling a single phase electrical cable with insulation layers. The cable consists of live , nuetral and earth wire. I want to make the AC current flow in the cable and analyze the temperature increase in the insulation layers of electrical cable. I am using Magnetic Fields>Coil>coil current, but I am not able to generate the alternating current in live and neutral wire. Kindly tell me how to generate the AC current in the live and nuetral wire. Your help is very much appriciated. Thank you.
Please login with a confirmed email address before reporting spam
Hello, What you're describing is exemplified in this model tutoriual series: https://www.comsol.com/model/cable-tutorial-series-43431
You may also find this article a helpful introduction: https://www.comsol.com/blogs/how-to-model-the-electromagnetic-heating-of-underground-cables/
Please login with a confirmed email address before reporting spam
Sir, Thank you so much for your help. if i find any other problem i will post here. :)