Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Deformation of oil droplets in water caused by pressure variation

Posted 13 dic 2018, 13:52 GMT-5 Structural & Acoustics, Fluid & Heat, Acoustics & Vibrations Version 5.4 2 Replies

Matteo Scopelliti
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

I am trying to build a model in which a drop of oil in water (emulsion) is subject to cyclical pressure variations (for example, sinusoidal). The final aim is to show the deformation of the spherical geometry of the droplet under different pressure condition. I've read many posts, but i couldn't find anyt info about how to model the droplet and which modules should be used for this simulations. Any suggestion would be greatly appreciated.

Please find below the simulation domain I am thinking to use.

Thanks

Attachments:

2 Replies Last Post 14 dic 2018, 00:57 GMT-5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 13 dic 2018, 14:47 GMT-5

Hello Matteo,

This example of an oil droplet rising through water could be of help to get started with your multiphase flow. https://www.comsol.com/model/rising-bubble-177

As an introduction to the various methods available for multiphase flow modeling in COMSOL, read this blog post.

Best,

Jeff

-------------------
Jeff Hiller
Hello Matteo, [This example](https://www.comsol.com/model/rising-bubble-177) of an oil droplet rising through water could be of help to get started with your multiphase flow. https://www.comsol.com/model/rising-bubble-177 As an introduction to the various methods available for multiphase flow modeling in COMSOL, read [this blog post](https://www.comsol.com/blogs/which-multiphase-flow-interface-should-i-use/). Best, Jeff
Matteo Scopelliti
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 14 dic 2018, 00:57 GMT-5

Hello Jeff,

thank you for the advice. I checked out the model you suggested before starting this post, but unfortunately it didn't solve most of my doubts, such as:

  • How can I model the pressure that will deform the bubble? Should i use the acoustic module, apply the input pressure to a boundary and perform a time domain study?

-How can I model the deformation of the oil droplet? I know that the structural mechanics module can show the deformation of an object, but it should be a solid. Can iI obtain the wanted result with the multiphase flow modeling?

Thanks, Matteo

Hello Jeff, thank you for the advice. I checked out the model you suggested before starting this post, but unfortunately it didn't solve most of my doubts, such as: - How can I model the pressure that will deform the bubble? Should i use the acoustic module, apply the input pressure to a boundary and perform a time domain study? -How can I model the deformation of the oil droplet? I know that the structural mechanics module can show the deformation of an object, but it should be a solid. Can iI obtain the wanted result with the multiphase flow modeling? Thanks, Matteo

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content