Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Coefficient form PDE, Zero Flux BC

Posted 10 ago 2011, 14:30 GMT-4 Version 4.0, Version 4.0a, Version 4.1, Version 4.2, Version 4.2a, Version 4.3 3 Replies

Kartiek Agarwal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

Can I ask if there is any way in Coefficient Form PDE, to cancel zero flux BC and apply Periodic Boundary Condition?

My file is attached. I really urgently need someone to help me out with this.

Thanks in advance,
Kartiek

Attachments:

3 Replies Last Post 31 lug 2015, 10:11 GMT-4
Kartiek Agarwal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16 ago 2011, 21:55 GMT-4
Is there really no way to apply the periodic boundary conditions without having the zero flux BC ?

At least, in the RF module applying Periodic Boundary Conditions overrides the other BC on that boundary. But not so in the PDE interface modes. Can this be corrected for?

Kartiek.
Is there really no way to apply the periodic boundary conditions without having the zero flux BC ? At least, in the RF module applying Periodic Boundary Conditions overrides the other BC on that boundary. But not so in the PDE interface modes. Can this be corrected for? Kartiek.
Wu Jia
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 gen 2013, 06:52 GMT-5

Hi Kartiek,

I also confronted with the same problem as you did. When using the periodic condition in the Weak form PDE Module, I found the zero flux setting is defined by default, and cannot be cancelled when setting the periodic boundary condition.

I want to ask that whether you have solved such a problem.

Many thanks for your reply.

Best regards,
Jia

Hi Kartiek, I also confronted with the same problem as you did. When using the periodic condition in the Weak form PDE Module, I found the zero flux setting is defined by default, and cannot be cancelled when setting the periodic boundary condition. I want to ask that whether you have solved such a problem. Many thanks for your reply. Best regards, Jia
Perry Gao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 31 lug 2015, 10:11 GMT-4
Hi jia

Have you solved the problem of zero flux BC?
I recently counter the same problem using weak form pde.
Please let me know if you've solved it

Best,

Wenlong
Hi jia Have you solved the problem of zero flux BC? I recently counter the same problem using weak form pde. Please let me know if you've solved it Best, Wenlong

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content