Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Do boundary elements work in eigenfrequency analysis?
Posted 10 gen 2019, 13:05 GMT-5 Structural & Acoustics, Acoustics & Vibrations, Modeling Tools & Definitions Version 5.3a 0 Replies
Please login with a confirmed email address before reporting spam
I am interested in calculating the mode shapes and frequencies for a structure surrounded by a fluid (air or water) to get the reduced frequency from the fluid loading. When I perform an eigenfrequency study I get mode shapes and frequencies for both the structure, the surrounding fluid volume, and the coupled modes. Since I am not inerested in the modes of the surrounding fluid, only the added mass on the structure, I tried to add boundary elements to the surrounding fluid volume thinking that that would eliminate the modes of the fluid volume but nothing changed. I also tried adding the boundary elements on the surface of my structure to no effect. It looks like boundary elements are diabled in the eigenfrequency solver.
Are boundary elements always excluded in eigenfrequency analysis or am I doing something wrong?
Is there a way to calculate fluid loaded mode frequencies for a structure without also modeling and meshing a surrounding fluid volume and getting those associated modes?
Thanks, Phil
Hello Philip Feurtado
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.