Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Out of memory during assembly

Posted 25 set 2011, 08:44 GMT-4 RF & Microwave Engineering, Heat Transfer & Phase Change, Studies & Solvers Version 4.2 1 Reply

Bhavik Patel
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi! i am simulating specific absorption rate in human head modeling, but at last stage it shows error
Out of memory during assembly. Please help me.
1 Reply Last Post 25 set 2011, 11:37 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 set 2011, 11:37 GMT-4
Hi

my first remark would be: add more RAM, or reduce the mesh density (if alowed to keep the resuts still valid),
your model is running over the capacity of your computer

--
Good luck
Ivar
Hi my first remark would be: add more RAM, or reduce the mesh density (if alowed to keep the resuts still valid), your model is running over the capacity of your computer -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content