Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Far-field radiation pattern of an optical waveguide

Posted 11 ott 2011, 09:36 GMT-4 RF & Microwave Engineering Version 4.2 3 Replies

pat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear forum users,

I would like to calculate the far field diffraction pattern resulting from a guided mode in an optical waveguide.
My specific example: light is guided in the core of a photonic crystal fiber, reaches the end and gets diffracted into free space. How does the pattern look in the far field (or at a certain distance z away from the fiber).

I know how to calculate the mode with a Boundary Mode analysis study. But this gives me only the near-field at a cross section of the fiber (which is supposed to be infinitely long for the boundary mode analysis).

Is there a way to transform this near-field calculation into far-field?

Thanks a lot
Patrick
3 Replies Last Post 11 ott 2011, 12:14 GMT-4
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 ott 2011, 10:01 GMT-4
Hi,

you can add the 'far-field' domain node under the 'Electromagnetic Waves' node. This makes far field variables available.
However, far field is the pattern at infinity, not a certain distance.
And a warning: plotting the far field in 3D displays is very time consuming, often much more than solving the system. I would recommend to use classical Azimuth/Elevation (1D) polar plots for that. They are fast.

Cheers
Edgar
Hi, you can add the 'far-field' domain node under the 'Electromagnetic Waves' node. This makes far field variables available. However, far field is the pattern at infinity, not a certain distance. And a warning: plotting the far field in 3D displays is very time consuming, often much more than solving the system. I would recommend to use classical Azimuth/Elevation (1D) polar plots for that. They are fast. Cheers Edgar
pat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 ott 2011, 10:50 GMT-4
Dear Edgar,

thanks for the reply. However, I am not using 3D modelling but 2D. Does it work there as well?

Best
Patrick

Dear Edgar, thanks for the reply. However, I am not using 3D modelling but 2D. Does it work there as well? Best Patrick
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 ott 2011, 12:14 GMT-4
I haven't tried 2D so far but one mouseclick shows you that the far field domain is available in 2D as well.
I haven't tried 2D so far but one mouseclick shows you that the far field domain is available in 2D as well.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content