Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
PML in acoustics module and damped eigen mode
Posted 13 nov 2011, 23:26 GMT-5 1 Reply
Please login with a confirmed email address before reporting spam
HI, All,
I am using PML in acoustics for damped eigenfrequency modeling. An example geometry can be a string anchored at two large blocks on its two ends. The two blocks are set as PML. I hope I can get the non inf Quality factor with complex frequency considering the damping inside PML.
It can be seen that the field (log10(dispacement^2))) is gradually decreasing from the anchor facets. However, only real frequency can be obtained. The Q is always infinite. Is there is anything wrong?
Thanks in advance.
Best,
J.Zheng
I am using PML in acoustics for damped eigenfrequency modeling. An example geometry can be a string anchored at two large blocks on its two ends. The two blocks are set as PML. I hope I can get the non inf Quality factor with complex frequency considering the damping inside PML.
It can be seen that the field (log10(dispacement^2))) is gradually decreasing from the anchor facets. However, only real frequency can be obtained. The Q is always infinite. Is there is anything wrong?
Thanks in advance.
Best,
J.Zheng
1 Reply Last Post 28 nov 2011, 17:32 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Problem solved.
Thanks support@comsol.com
Thanks support@comsol.com