Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Import An Input Stress-Strain Initial State From Abaqus To Comsol
Posted 10 set 2019, 15:52 GMT-4 Structural & Acoustics, Battery Design Version 5.4 1 Reply
Please login with a confirmed email address before reporting spam
Dear all I was wondering if it would be possible to import the deformed mesh/geometry and an input file with the stress-strain data after a solid mechanics analysis made in ABAQUS to define an initial state in COMSOL in order to use that geometry and those stress-strain results in other COMSOL's modules. Can anybody help me? Any help is appreciated.
Please login with a confirmed email address before reporting spam
Check if ABAQUS can export the deformed geometry in one of these formats. https://www.comsol.com/products/specifications/cad/
Then you can import that into COMSOL.
You may be able to define an interpolation function in COMSOL that uses data exported from ABAQUS as an initial stress/strain. See this.
https://www.comsol.com/blogs/using-point-cloud-data-in-your-comsol-model/
Granted since COMSOL has functionality to do this entirely within COMSOL, you might as well make life easier by solving the solid mechanics problem in COMSOL.
-------------------We all have opinions. But the COMSOL support team has the truth. I don't know if my opinion is still the truth. Check with that team before you try this at home!