Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Eigenfrequency of piezoelectric devices with an electrical circuit
Posted 16 dic 2011, 12:50 GMT-5 Low-Frequency Electromagnetics, MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Materials, Structural Mechanics Version 4.1, Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
I am trying to see the effect of a load on the eigenfrequency of a piezoelectric device. (piezoelectric on silicon)
I have modeled the piezoelectric film (+the silicon wafer) and I have added a resistor using an electrical circuit on the piezoelectric film.
I do not find a way to solve the problem as i always get "Failed to evaluate variable Jacobian".
Moreover, this model worked very well on 3.5a using the spice editor.
I attach the model.
Any idea to solve this problem on 4.2 ?
With many thanks,
SB
Attachments:
Hello Sebastien Boisseau
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
I can not open it?