Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Component duplication and parametrization

Posted 28 gen 2020, 02:33 GMT-5 2 Replies

Pierre Jaquier
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

I would like to know if there is a way to duplicate N times an entire component and set the number of instance in a parameter. Below a brief description:

  • 2D model, RF or AC/DC simulation
  • The complete structure is made up of N modules stacked on each other, each module consisting of 2 electrodes (kind of PCB antenna) connected to a lumped port with fixed impedance.

Is this possible to parametrize such structure and "duplicate" N time (1 to 50) a module that integrates element like lumped port ?

Thanks for your help

2 Replies Last Post 29 gen 2020, 03:11 GMT-5
Pierre Jaquier
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 28 gen 2020, 07:34 GMT-5

building the geometry with parameters seems totally feasible by using the "array" geometry tool. However, is there a way to duplicate the physics element too (lumped port) ?

building the geometry with parameters seems totally feasible by using the "array" geometry tool. However, is there a way to duplicate the physics element too (lumped port) ?
Sven Friedel COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 29 gen 2020, 03:11 GMT-5

HI Pierre,

physics definition can be highly automated by using model methods. Please refer to the following blogs to get started:

https://www.comsol.com/search/?s=automate&subset=blog

Best regards, Sven

HI Pierre, physics definition can be highly automated by using model methods. Please refer to the following blogs to get started: https://www.comsol.com/search/?s=automate&subset=blog Best regards, Sven

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content