Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
reverse piezoelectric effect error
Posted 2 mar 2020, 19:32 GMT-5 Piezoelectric Devices, Structural & Acoustics, Results & Visualization Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I am simulating the converse and reverse piezoelectric effects.
The piezoelectric element used was PIC-255, and the elastic body was CFRP (50 GPa).
The simulation result of converse piezoelectric effect is similar to the experiment (about 20 V at 5 mm displacement).
The problem is the reverse piezoelectric effect.
In the experiment, when applied to the piezoelectric element from 0 to 110 V, displacement of about 0.5 mm occurs.
However, the simulation shows that a displacement of about 0.1 mm occurs.
To reduce this error, methods such as adhesive thickness and Base Vector System have been used but this problem still occurs.
I don't know what I overlooked.
Sincerely.
Hello Hyunseok Lee
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.