Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
ht_pem
Posted 12 gen 2012, 18:40 GMT-5 Battery Design, Studies & Solvers Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am new to comsol 4.2 and I started with the built in model of ht_pem in the model library.
It seems that changing the dimension of this model (L) to make the channel longer result in a problem for solver that can not evaluate some of parameters.
I have no idea why such a change result in this error so any comments is appreciated.
"
Failed to find a solution for all parameters,even when using the minimum parameter step.
Segregated group 3
Attempt to evaluate negative power of zero.
Function: ^
Returned solution is not converged.
Thanks,
Siamak
I am new to comsol 4.2 and I started with the built in model of ht_pem in the model library.
It seems that changing the dimension of this model (L) to make the channel longer result in a problem for solver that can not evaluate some of parameters.
I have no idea why such a change result in this error so any comments is appreciated.
"
Failed to find a solution for all parameters,even when using the minimum parameter step.
Segregated group 3
Attempt to evaluate negative power of zero.
Function: ^
Returned solution is not converged.
Thanks,
Siamak
Attachments:
1 Reply Last Post 11 feb 2012, 08:58 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I had same problem, but when I increased the value of inlet velocities, it solved.
Tell me if your problem solved.
I had same problem, but when I increased the value of inlet velocities, it solved.
Tell me if your problem solved.