Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Copying stress field from component 1 to component 2
Posted 5 ott 2020, 07:44 GMT-4 Mesh, Parameters, Variables, & Functions, Structural Mechanics Version 5.5 0 Replies
Please login with a confirmed email address before reporting spam
The below post is related to an archived discussion
Hi, any help would be greatly appreciated. I will try explain as best as possible (using COMSOL 5.5).
My first component is a simple rectnagular geometry, where I prescribe a displacement at certain points along one interface. This essentially deforms the geometry, creating a von Mises stress field within the deformed domain.
I then want to simulate varies species growing within the deformed geometry which are directly linked to the previously computed von Mises stress field. Essentially, in other words, can this exact stress field be inputted as some sort of initial condition (without the LiveLink features).
I tried looking at defining this value (solid.mises) as a global variable, but the initial conditions which are directly related to this value highlight yellow, so something must not be right.
Hope to hear back from someone.
Best, Alistair
Hello Alistair McQueen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.