Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Coplanar stripline
Posted 21 apr 2021, 18:30 GMT-4 Low-Frequency Electromagnetics Version 5.6 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I'm fairly new to COMSOL and am trying to simulate a coplanar stripline. My current issue is trying to figure out how to set up the ports for the simulation. Is there a particular way you would do this? On thing to take into consideration is that I am not including a ground plane below the substrate.
Best, Daniel
Please login with a confirmed email address before reporting spam
See the cpw_bandpass_filter example in the Application Library, Under RF Module, Filters. You should be able to make an adaptation of the methods illustrated there. You can read about it in detail at https://www.comsol.com/model/download/824371/models.rf.cpw_bandpass_filter.pdf . Also, see https://www.comsol.com/blogs/modeling-coplanar-waveguides/
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara