Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Can Darcy's law model pseudo-steady and transient state?
Posted 22 set 2021, 17:45 GMT-4 Fluid & Heat, Porous Media Flow Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hi,
Assuming I have a 1 meter long core. Assume permeability is 1 Darcy, and porosity is 0.2. My injection velocity is about 2 cm/s. The outlet has same pressure as atmosphere pressure. So, actually, for water starts from inlet to outlet, it needs about 1/0.02 =50 s to reach the outlet. I want to see how the fluid velocity change between 0-50 s. But COMSOL only gives me one number of velocity. I assume this velocity is the steady state velocity. How can I get the changes of velocity before it reaches to breakthrough?
Another question is, can COMSOL simulate the skin effect near the wellbore by using Darcy's law?
It's most likely I will not get response from this forum. But whoever reads this post and have similar issue as me, we can try to discuss together.
Thanks in advance.
Hello Xuejia Du
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.