Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
beam buckling
Posted 2 lug 2012, 18:20 GMT-4 Structural Mechanics Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
As shown in attached picture, it is a beam pined-pined at both end. An axial force is applied along the centroidal axis and the equation for the beam is d2 v/dx2 +A^2 v = 0. The boundary condition at the left end is pined but free to move along the centroidal axis. My question is how to model this boundary condtion in COMSOL.
Please give me some suggestions about it.
If anyone can give me a COMSOL model file with this problem, that would be very appriciated.
Thank you very much in advance for any help.
Attachments:
Hello Leon Pan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.