Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
The Pressure-wave speed & Shear-wave speed
Posted 3 lug 2012, 18:59 GMT-4 Acoustics & Vibrations, Structural Mechanics Version 4.2a, Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
In Comsol help, I could not find much information for these two parameters.
The Pressure-wave speed (longitudinal wave speed) cp (SI unit: m/s) and the Shear-wave speed (transverse wave speed) cs (SI unit: m/s).
My question:
Does Comsol take the Complex value for these parameters? Because I would like to setup attenuation in the linear elastic model. By setting the complex values on these two parameters, I will have attenuation for Compression wave and shear wave speed.
Thanks.
The Pressure-wave speed (longitudinal wave speed) cp (SI unit: m/s) and the Shear-wave speed (transverse wave speed) cs (SI unit: m/s).
My question:
Does Comsol take the Complex value for these parameters? Because I would like to setup attenuation in the linear elastic model. By setting the complex values on these two parameters, I will have attenuation for Compression wave and shear wave speed.
Thanks.
1 Reply Last Post 4 lug 2012, 01:47 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I cannot give you any definitive answer, as I do not have that module, but "my way" in such cases is to try a vers simple model (mostly 2D) and try it out, COMSOL accepts many complex input values, as phasors
--
Good luck
Ivar
I cannot give you any definitive answer, as I do not have that module, but "my way" in such cases is to try a vers simple model (mostly 2D) and try it out, COMSOL accepts many complex input values, as phasors
--
Good luck
Ivar