Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Selective mesh
Posted 13 lug 2012, 00:47 GMT-4 Geometry, Mesh Version 4.3 2 Replies
Please login with a confirmed email address before reporting spam
Ho guys... I have a complex 3D geometry, composed by 2 different domains. 1 domain is pretty smooth and easy
to mesh; the second presents thin areas, meshables only with finer option. Can I mesh the model with two different size option, one for each domain?
Thanks
to mesh; the second presents thin areas, meshables only with finer option. Can I mesh the model with two different size option, one for each domain?
Thanks
2 Replies Last Post 15 lug 2012, 09:31 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you can add as many size and dimension you want to a mesh node, and then define different mesh sizes for different entities. Still "my way" when I have complex geoemtry is to divide it into several sub-domains, by splitting the geometry, you add a few internal boundaries, but yu gain in selectivity for your meshing strategy
--
Good luck
Ivar
you can add as many size and dimension you want to a mesh node, and then define different mesh sizes for different entities. Still "my way" when I have complex geoemtry is to divide it into several sub-domains, by splitting the geometry, you add a few internal boundaries, but yu gain in selectivity for your meshing strategy
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thanks! I got it!