Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Changing the coordinate system
Posted 25 lug 2012, 15:20 GMT-4 Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Hi
I have a question on how to work in cylindrical coordinate system, instead of the default cartesian coordinate. I am performing 3D simulation in Comsol 4.2. I right-click "Definitions > coordinate systems > cylindrical system" under "Model 1". However, when I draw my structures in "Geometry 1", it is still in xyz cartesian coordinates. Also, the axis buttons on top of the structure I have just drawn are still xy, yz, zx formats. How do I work completely in cylindrical coordinate system?
Thank you in advance.
Erwin
I have a question on how to work in cylindrical coordinate system, instead of the default cartesian coordinate. I am performing 3D simulation in Comsol 4.2. I right-click "Definitions > coordinate systems > cylindrical system" under "Model 1". However, when I draw my structures in "Geometry 1", it is still in xyz cartesian coordinates. Also, the axis buttons on top of the structure I have just drawn are still xy, yz, zx formats. How do I work completely in cylindrical coordinate system?
Thank you in advance.
Erwin
1 Reply Last Post 25 lug 2012, 16:52 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
COMSOL only works in the cartesian cordinate system, but you can define a cylindrical one and use that as a reference for most BCs, physics or your own formulas
--
Good luck
Ivar
COMSOL only works in the cartesian cordinate system, but you can define a cylindrical one and use that as a reference for most BCs, physics or your own formulas
--
Good luck
Ivar