Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Johnson Cook
Posted 27 ago 2012, 10:13 GMT-4 Heat Transfer & Phase Change, Materials, Structural Mechanics Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi!
Is there a possibility to implement a Johnson Cook Material model (hardening function dependent on Temperature, strain and strain rate) in the nonlinear structural mechanics module?
I have not found an "effective strain rate" variable to do it myself. Does somebody have an example model for this purpose?
Thank you very much!
Is there a possibility to implement a Johnson Cook Material model (hardening function dependent on Temperature, strain and strain rate) in the nonlinear structural mechanics module?
I have not found an "effective strain rate" variable to do it myself. Does somebody have an example model for this purpose?
Thank you very much!
1 Reply Last Post 27 ago 2012, 16:27 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi Hendrik,
I have implemented something similar for viscoplastic materials models so I believe a Johnson Cook model can be user implemented in COMSOL. You should define the effective strain rate based on the individual plastic strain components then add a global variable for the time integral of this strain rate.
Check out also the COMSOL example titled “Viscoplastic creep in Solder Joints” which implements an Anand material model. You should look at that example prior to Version 4.3 since COMSOL now has the Anand model built-in.
Nagi Elabbasi
Veryst Engineering
I have implemented something similar for viscoplastic materials models so I believe a Johnson Cook model can be user implemented in COMSOL. You should define the effective strain rate based on the individual plastic strain components then add a global variable for the time integral of this strain rate.
Check out also the COMSOL example titled “Viscoplastic creep in Solder Joints” which implements an Anand material model. You should look at that example prior to Version 4.3 since COMSOL now has the Anand model built-in.
Nagi Elabbasi
Veryst Engineering