Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

temperature dependence of the shape

Posted 13 set 2012, 17:39 GMT-4 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD) Version 4.3 1 Reply

Rafal Kasztelanic
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have an element made of a polymer. I have the temperature dependence of viscosity, heat conductivity, etc.
How can I create model for simulation of the changing shape of the item (gravity) at the time of increasing temperature.

Regards,
RaK
1 Reply Last Post 15 set 2012, 05:31 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15 set 2012, 05:31 GMT-4
Hi

I would say use a body load of the type (rho*g_const) [N/m^3] and run a temperature sweep, so you need to solve for either u,v,w (displacements) and T or u,v,w (velocities) and T

--
Good luck
Ivar
Hi I would say use a body load of the type (rho*g_const) [N/m^3] and run a temperature sweep, so you need to solve for either u,v,w (displacements) and T or u,v,w (velocities) and T -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content