Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Constraint condition: Guided

Posted 18 set 2012, 15:53 GMT-4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Parameters, Variables, & Functions, Structural Mechanics Version 4.3 0 Replies

Huafeng Liu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I'm trying to set a guided constraint condition to my compliant folded beam in COMSOL 4.3.

Guided boundary condition has been defined as: a condition of support at the ends of a beam or column or at the edge of a plate or shell that prevents rotation of the edge of the neutral surface but permits longitudinal and transverse displacement.

Now I set guided boundary condition on the movable end of my folded beam that:
one external axial load force on the linkage block of the folded beam;
two roller on the each side of my force loading linkage block, parallel with the axial line;

Is this configuration correct? Or what's the correct one?

Thanks a lot!

Attachments:

0 Replies Last Post 18 set 2012, 15:53 GMT-4
COMSOL Moderator

Hello Huafeng Liu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content