Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Quality Factor of a Double-clamped Beam
Posted 27 dic 2022, 09:13 GMT-5 MEMS & Piezoelectric Devices, Structural Mechanics, Structural Dynamics Version 6.0 0 Replies
Please login with a confirmed email address before reporting spam
Dear all,
I am now woking with a double-clamped beam resonator. However, when the slenderness ratio (h/L) is smaller than about 1/80, the solution from COMSOL is far away from the analytical solution by Zener's formula. When the ratio reaches about 1/300, the difference becomes unbelivable. My operation is mainly based on this example: https://www.comsol.com/model/thermoelastic-damping-in-a-mems-resonator-1439. A finer mesh cannot solve this issue. What may cause this issue and how can I solve that?
Hello Lingzhi Chen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.