Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Scattered field with a mirror

Posted 26 set 2012, 10:47 GMT-4 RF & Microwave Engineering, Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.3 4 Replies

Matth Duperron
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have a problem with boundary conditions. I'd like to study the scaterring field of a metallic object on a mirror (in 2D).
I create a box with PML on each side. I use the "solve for: scattered field" setting with a field Ex=E0*exp(j*emw.k0*y) and I verify that if i work in air, the side PMLs don't interfere with my plane wave. But when i add a mirror, the PMLs disturb my electric field and seems to create periodic interferences perpendicular to the mirror surface.
I tried different other boundary condition to avoid this problem but i haven't yet find the solution.
Did anyone already have this problem?
thanks

Mat
4 Replies Last Post 27 set 2012, 08:13 GMT-4
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 26 set 2012, 16:46 GMT-4
Make PML thicker, move it further and mesh it finer.
Make PML thicker, move it further and mesh it finer.
Matth Duperron
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 set 2012, 04:25 GMT-4
That's seem to make no difference.
Actually, i have also the problem without mirror, just a plane wave with PML. I attach the mph file to this message.
I'm surely doing something basic wrong, but what?
That's seem to make no difference. Actually, i have also the problem without mirror, just a plane wave with PML. I attach the mph file to this message. I'm surely doing something basic wrong, but what?

Attachments:

Andrea Ferrario COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 set 2012, 05:15 GMT-4
Hi Mat,

The top and bottom layers extend all the way to the sides. You need to add separate domains at the "corners" of your PMLs. See page 239 of the User's Guide for an example image.

--
Andrea Ferrario
Electromagnetics Group
COMSOL AB
Hi Mat, The top and bottom layers extend all the way to the sides. You need to add separate domains at the "corners" of your PMLs. See page 239 of the User's Guide for an example image. -- Andrea Ferrario Electromagnetics Group COMSOL AB
Matth Duperron
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 set 2012, 08:13 GMT-4
Indeed, that's much better!
But now, when i add my gold mirror, i have important interferences who do not disappear with the length of my box or the mesh size.
An idea?
Indeed, that's much better! But now, when i add my gold mirror, i have important interferences who do not disappear with the length of my box or the mesh size. An idea?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content