Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How can I get non-uniform mesh?

Posted 2 ott 2012, 19:46 GMT-4 Mesh Version 4.2a 1 Reply

Azizuddin Abdul Aziz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

For example, suppose I need to mesh a sphere with tetrahedral. I want the center is very dense, while the outer surface is coarser. What do I do?

I tried the edge distribution, but it does not reduce the element number much.

Thanks in advance.
1 Reply Last Post 3 ott 2012, 02:53 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 3 ott 2012, 02:53 GMT-4
Hi

you can add one or several "layers" (check the geoemtry node), hence get a sphere inside a sphere ... then change the desired mesh density per domain

--
Good luck
Ivar
Hi you can add one or several "layers" (check the geoemtry node), hence get a sphere inside a sphere ... then change the desired mesh density per domain -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content