Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Field behind metal shield
Posted 12 ott 2012, 05:42 GMT-4 Low-Frequency Electromagnetics Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Dear Users
I want to model the following simple case.
Within vacuum, a 2D body carries a surface charge. Next to it is a metal body. I want to obtain the quality of the field direction behind the metal. From theory we know that the metal is not polarizable, i.e. when subject to a field, the charge within separates in order to build up an opposing field within the metal that completely cancels the net field within the metal. The separated charge then produces a field of its own on the opposite side and so the field exits on the opposite side. I tried to model this and show it in this figure:
picturepush.com/public/11036949
My question is:
How do I define the right square to be a metal, i.e. such that the field lines terminate ON the metal on the close side and not "go around it" and then exit on the far side again?
Currently, due to a lack of knowing how to define the metal, I subtract the right rectangle from the vacuum box, but that's not giving the right solution.
Thanks for help.
I want to model the following simple case.
Within vacuum, a 2D body carries a surface charge. Next to it is a metal body. I want to obtain the quality of the field direction behind the metal. From theory we know that the metal is not polarizable, i.e. when subject to a field, the charge within separates in order to build up an opposing field within the metal that completely cancels the net field within the metal. The separated charge then produces a field of its own on the opposite side and so the field exits on the opposite side. I tried to model this and show it in this figure:
picturepush.com/public/11036949
My question is:
How do I define the right square to be a metal, i.e. such that the field lines terminate ON the metal on the close side and not "go around it" and then exit on the far side again?
Currently, due to a lack of knowing how to define the metal, I subtract the right rectangle from the vacuum box, but that's not giving the right solution.
Thanks for help.
1 Reply Last Post 12 ott 2012, 07:53 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
You can either assign a PEC (perfect electrical conductor) or impedance boundary condition or add your metal of choice to the materials node and assign the respective domain (the rectangle) to this material. This is all explained in the documentation and in many example model and tutorials.
Cheers
Edgar