Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
about error in value getting
Posted 12 nov 2012, 11:03 GMT-5 Low-Frequency Electromagnetics Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Dear all ,
I am doing simulation on inductive coupling , taking two coils , one with six turns , another with single turn ,
I am exiciting my coil by voltage at 320 V , and i am observing the flux and mutual inductance and the magnetic field density , by derived value , under global evaluation , i got flux is around 1.11*10^-5
i derived this value by putting following expression , when i am deriving values from global derivation
real(((mf.VCoil_2/mf.ICoil_3/mf.iomega)*mf.ICoil_3)) = flux
from normal physical law , we know Flux = Inductance *current
If i want to find inductance , flux/current
i expressed this in terms of above expression
real(((mf.VCoil_2/mf.ICoil_3/mf.iomega))) = inductance
when i am dividing flux by current i am not getting exact answer , what i need to get , i need to get 2.59*10^-6 as a inductance
but i am getting around 8.99*10^-5
can you pls let me know where is the problem
ama ttaching the model
--
kishore Naik Mude
I am doing simulation on inductive coupling , taking two coils , one with six turns , another with single turn ,
I am exiciting my coil by voltage at 320 V , and i am observing the flux and mutual inductance and the magnetic field density , by derived value , under global evaluation , i got flux is around 1.11*10^-5
i derived this value by putting following expression , when i am deriving values from global derivation
real(((mf.VCoil_2/mf.ICoil_3/mf.iomega)*mf.ICoil_3)) = flux
from normal physical law , we know Flux = Inductance *current
If i want to find inductance , flux/current
i expressed this in terms of above expression
real(((mf.VCoil_2/mf.ICoil_3/mf.iomega))) = inductance
when i am dividing flux by current i am not getting exact answer , what i need to get , i need to get 2.59*10^-6 as a inductance
but i am getting around 8.99*10^-5
can you pls let me know where is the problem
ama ttaching the model
--
kishore Naik Mude
Attachments:
1 Reply Last Post 12 nov 2012, 14:29 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I'm not by my WS just now so I cannot open your model, but have you checked the Knowledge Base (main COMSOL site) about flux derivations, and have you checked your mesh sensitivity ?
a factor about 3 could be such kind of effects playing you some games
--
Good luck
Ivar
I'm not by my WS just now so I cannot open your model, but have you checked the Knowledge Base (main COMSOL site) about flux derivations, and have you checked your mesh sensitivity ?
a factor about 3 could be such kind of effects playing you some games
--
Good luck
Ivar