Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Mesh Problem?
Posted 20 nov 2012, 16:37 GMT-5 Low-Frequency Electromagnetics Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi, guys.
I got some problem with this message after computation.
'Failed to find a solution.
Singular matrix.
For mesh-case 0 there are 1 void equations (empty rows in matrix) for the variable mod1.mef.mi1.term1.V0_ode.
at coordinates: (0,0,0), ...
and similarly for the degrees of freedom (empty columns in matrix).
Returned solution is not converged.'
I think it is mesh problem but I do not know how to fix it.
I need your guys help!!!!
P.S I cannot attach my file because it is too large. Sorry.
I got some problem with this message after computation.
'Failed to find a solution.
Singular matrix.
For mesh-case 0 there are 1 void equations (empty rows in matrix) for the variable mod1.mef.mi1.term1.V0_ode.
at coordinates: (0,0,0), ...
and similarly for the degrees of freedom (empty columns in matrix).
Returned solution is not converged.'
I think it is mesh problem but I do not know how to fix it.
I need your guys help!!!!
P.S I cannot attach my file because it is too large. Sorry.
1 Reply Last Post 21 nov 2012, 01:16 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I do not believe its a mesh issue, if you mesh node& statistics are OK and it does not say "elements not meshed" it's rather that you ODE expression is missing a boundary condition or some decent initial values.
To make a model smaller, so you might upload it, just do a Edit clear all mesh, Edit clear all solution and File reset model, then save as with a new name and upload ;)
--
Good luck
Ivar
I do not believe its a mesh issue, if you mesh node& statistics are OK and it does not say "elements not meshed" it's rather that you ODE expression is missing a boundary condition or some decent initial values.
To make a model smaller, so you might upload it, just do a Edit clear all mesh, Edit clear all solution and File reset model, then save as with a new name and upload ;)
--
Good luck
Ivar