Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Filament shape over fixed extremities

Posted 12 dic 2023, 06:13 GMT-5 Geometry, Results & Visualization, Structural Mechanics Version 6.1 1 Reply

Pietro Covre
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Goodmorning,

I would like to ask some help on how to determine the shape of a filament with the two extremis held in place by a couple of mechanical joints. I would like moreover to export the obtained shape into a geometry that I can use in another simulation.

Thank you very much for the support. Cheers

1 Reply Last Post 12 dic 2023, 09:07 GMT-5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 11 months ago 12 dic 2023, 09:07 GMT-5
Updated: 11 months ago 12 dic 2023, 09:21 GMT-5

Hello Pietro,

You seem to be describing a catenary problem. If so, the approach described in this blog post is what I would try.

Best,

Jeff

-------------------
Jeff Hiller
Hello Pietro, You seem to be describing a catenary problem. If so, the approach described in [this blog post](https://www.comsol.com/blogs/how-to-solve-for-the-brachistochrone-curve-between-points/) is what I would try. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content