Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Laminated core

Posted 5 dic 2012, 16:17 GMT-5 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.3 6 Replies

Rosa Papadopoulou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

I’m interested in simulating the induction heating of an object that occurs with the help of a rectangular coil that is placed above it. The problem that I’m facing is that I want to increase the produced magnetic field by using a soft iron core (U shaped and around the coil) that is laminated into 1665 parts and each one of them is insulated so that they won’t interact with each other. Is it possible to do this with Comsol? I would be grateful if someone could explain me how.

Thank you in advance,
Rosa
6 Replies Last Post 20 dic 2012, 14:39 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 dic 2012, 01:00 GMT-5
Hi

It is certainly possible, but you will get a terribly complex and large mesh if you are in 3D, so you would probably need a cluster.
On the other side you can get reasonably close if you apply some good physics engineering tricks to your model, at least I would try this: use an anisotropic model of your iron, it will basically be for the conductivity, that should be set close to "0" across the laminated direction. The lamination is mainly for the Eddy currents, no ? and it should have little effect on the magnetic field

--
Good luck
Ivar
Hi It is certainly possible, but you will get a terribly complex and large mesh if you are in 3D, so you would probably need a cluster. On the other side you can get reasonably close if you apply some good physics engineering tricks to your model, at least I would try this: use an anisotropic model of your iron, it will basically be for the conductivity, that should be set close to "0" across the laminated direction. The lamination is mainly for the Eddy currents, no ? and it should have little effect on the magnetic field -- Good luck Ivar
Rosa Papadopoulou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 dic 2012, 08:36 GMT-5
OK I will try it! Thank you very much

Rosa

OK I will try it! Thank you very much Rosa
Rosa Papadopoulou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 dic 2012, 03:13 GMT-5
Dear Ivar,

I've tried to define the conductivity of the iron as anisotropic but comsol changes my option on its own to the other available options (isotropic,symmetric, diagonal). Do you have any idea why is this happening? I'm working in 2D.
Dear Ivar, I've tried to define the conductivity of the iron as anisotropic but comsol changes my option on its own to the other available options (isotropic,symmetric, diagonal). Do you have any idea why is this happening? I'm working in 2D.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 dic 2012, 03:21 GMT-5
Hi

it could be that in 2D axi you can anly use a limited set of anisotroy cases, to respect the 2D-axi symmetry.

Are you in 2D-axi ?

--
Good luck
Ivar
Hi it could be that in 2D axi you can anly use a limited set of anisotroy cases, to respect the 2D-axi symmetry. Are you in 2D-axi ? -- Good luck Ivar
Rosa Papadopoulou
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 dic 2012, 03:25 GMT-5
Hello,

actually I'm in 2D because the coil is a straight one.
Hello, actually I'm in 2D because the coil is a straight one.
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 dic 2012, 14:39 GMT-5
Hi

but then anisotropy should apply (I can select anisotropic material in 2D and 2D - axi (v4.3a) ;)

--
Good luck
Ivar
Hi but then anisotropy should apply (I can select anisotropic material in 2D and 2D - axi (v4.3a) ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content