Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to set the conditions for simulating the vibration of ultrasonic sensors
Posted 10 mar 2024, 10:10 GMT-4 Structural & Acoustics, Acoustics & Vibrations Version 6.2 1 Reply
Please login with a confirmed email address before reporting spam
The excitation source is set to the specified displacement, and the pressure of solid mechanics is calculated. When calculating displacement, there is displacement only when the signal is input, and the subsequent displacement is always zero. How to solve this problem
Please login with a confirmed email address before reporting spam
We would likely need to see the .mph file to provide specific guidance for this question. Can you upload it to the forum? Otherwise it might help to compare the model to models with similar setup like here: https://www.comsol.com/model/piezoacoustic-transducer-1477.
-Mark