Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Topology optimization for resonator membrane
Posted 19 mar 2024, 23:07 GMT-4 Modeling Tools & Definitions, Studies & Solvers, Structural Mechanics Version 6.2 0 Replies
Please login with a confirmed email address before reporting spam
Hello everyone,
I have been trying to get a topology optimization to work for my model. I am using the Membrane Interface and want to use topology optimization with an eigenfrequency study to optimize for a high quality factor. Basically I want Comsol to shape the membrane between the outer ring attached to substrate and a central defect. The attached png highlights the area I want to change the geometry for.
The study runs but ends just after one cycle and I can't figure out what exactly I am missing.
Things I suspect:
I am trying to use a density based optimization here whereas the membrane is like a 2D boundary so maybe that doesn't work somehow
I might have to somehow include a stationary study step but I wouldn't be sure how that can be tied into the optimization. I read that the Helmholtz filter in the density model might need a stationary solver.
I would be very grateful for any pointers.
Sincerely, Benedikt Gregor
Attachments:
Hello Benedikt Gregor
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.