Arc Length Method in cohesive forces modeling

Please login with a confirmed email address before reporting spam

Hi, every one, I have a problem of snap back curve of a crack point advancement. At a certain value of sigma (the applied force), at y axis, and crack propogation, at x axis. as it shows in following capture; the snap-back shows when sigma increases, the crack advances. How to implement the Arc Length method on COMSOL to control the charge increasing and the displacement increasing.



1 Reply Last Post 24 mag 2024, 08:45 GMT-4
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 months ago 24 mag 2024, 08:45 GMT-4

I think you should first try to adapt the method used in

https://www.comsol.com/model/postbuckling-analysis-of-a-hinged-cylindrical-shell-10257

Introduing an arc length method is more complicated, but here is an example for comparison:

https://www.comsol.com/model/postbuckling-analysis-using-an-incremental-arc-length-method-119001

-------------------
Henrik Sönnerlind
COMSOL
I think you should first try to adapt the method used in Introduing an arc length method is more complicated, but here is an example for comparison:

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.