Adding a DC bias to an AC signal - Electrostatics

Please login with a confirmed email address before reporting spam

Hello,

For the sake of my question, lets say I am attempting to calculate an electric field in a very simple geometry (3 plates of equal spacing. All I am given is that the plates are 3kV apart (+3 on the top, 0 in the middle, -3 on the bottom), and they are riding on a 10kV RMS AC signal.

I have attempted using a boundary electrical potential condition with a harmonic perturbation, but I have little confidence in the correctness of my approach.

For clarity: I am asking the best way to apply 10kV RMS AC signal +/- 3kV DC offset to a geometry.

I am using version 6.1, and the AC/DC module.


2 Replies Last Post 3 ott 2024, 14:06 GMT-4
Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 3 ott 2024, 12:59 GMT-4

David,

the most general way is to run a time dependent study. Make sure you run a stationary step with the BCs for t = 0 before the time dependent step.

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
David, the most general way is to run a time dependent study. Make sure you run a stationary step with the BCs for t = 0 before the time dependent step. Cheers Edgar

Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 2 months ago 3 ott 2024, 14:06 GMT-4

Is your problem linear? If so, it would seem to me that you might be able to add the extra potential in post-processing.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Is your problem linear? If so, it would seem to me that you might be able to add the extra potential in post-processing.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.