Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Plotting the gap distance variable

Posted 14 feb 2013, 20:53 GMT-5 Structural Mechanics Version 3.5a 3 Replies

Ryan Musson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to do something very simple, but it doesn't seem to be intuitive. I have a contact pair in the structural mechanics module and I want to plot the gap distance variable as a function of time. I know this is should be simple, but I am stuck!

Ryan
3 Replies Last Post 22 feb 2013, 13:20 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 15 feb 2013, 01:09 GMT-5
Hi

that should work, but do not forget that the gap distance is a field (hence depends on x,y,z and t) so for the plot either you take an average value or you measure from a "point" to get a time plot

Now I do not rem,ember the distance variable name in 3.5 any longer, check the doc and the equations, it's in there somewhere ;)

--
Good luck
Ivar
Hi that should work, but do not forget that the gap distance is a field (hence depends on x,y,z and t) so for the plot either you take an average value or you measure from a "point" to get a time plot Now I do not rem,ember the distance variable name in 3.5 any longer, check the doc and the equations, it's in there somewhere ;) -- Good luck Ivar
Ryan Musson
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22 feb 2013, 10:18 GMT-5
I plotted the gap distance variable (gap_cp21_smps, in my case) for contact pair 21 at point 108, which happens to be on the slave boundary for that pair. I attached a picture of the setup for clarity. The plot which COMSOL generated seems reasonable, however I am unsure of what the data physically represents. I thought that the gap distance variable was simply a distance that I could plot as a function of time. What does it mean to say "the gap distance variable at point 108"?

Also, how would I plot the average value of the gap distance variable?

Ryan
I plotted the gap distance variable (gap_cp21_smps, in my case) for contact pair 21 at point 108, which happens to be on the slave boundary for that pair. I attached a picture of the setup for clarity. The plot which COMSOL generated seems reasonable, however I am unsure of what the data physically represents. I thought that the gap distance variable was simply a distance that I could plot as a function of time. What does it mean to say "the gap distance variable at point 108"? Also, how would I plot the average value of the gap distance variable? Ryan

Attachments:

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 22 feb 2013, 13:20 GMT-5
Hi

if you check the doc, the gap distance of a "point" is the distance from that point along the surface normal to the interception of the other boundary, so if you want an average you need to average over a boundary area/distance, not that easy as you might not know where the contact is really over the contact region

--
Good luck
Ivar
Hi if you check the doc, the gap distance of a "point" is the distance from that point along the surface normal to the interception of the other boundary, so if you want an average you need to average over a boundary area/distance, not that easy as you might not know where the contact is really over the contact region -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content