Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

show the field lines around a magnet

Please login with a confirmed email address before reporting spam

Hi.

How can show the field lines around a magnet?

Thank.

1 Reply Last Post 17 feb 2013, 11:41 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 feb 2013, 11:41 GMT-5
Hi
you go under your plot and add the field line sub-node, define the field you want B (default normally), or H ... and then set the density distribution, if required

--
Good luck
Ivar
Hi you go under your plot and add the field line sub-node, define the field you want B (default normally), or H ... and then set the density distribution, if required -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.