Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Set a Rigid Body
Posted 3 mar 2010, 07:33 GMT-5 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
In my last post I have forgot to post the question, so here is the problem again!
In my problem I have a block which presses a cylinder. The block is much stiffer than the cylinder so I'd like to consider it as rigid body. How can I set this block as a rigid body?
Thanks a lot!
Hesdras
In my last post I have forgot to post the question, so here is the problem again!
In my problem I have a block which presses a cylinder. The block is much stiffer than the cylinder so I'd like to consider it as rigid body. How can I set this block as a rigid body?
Thanks a lot!
Hesdras
2 Replies Last Post 4 ago 2010, 18:18 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the "lazy way" is to set E the young modulus some 1000x or more stiffer than the "soft block"
Ivar
the "lazy way" is to set E the young modulus some 1000x or more stiffer than the "soft block"
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Ivar,
And which way is not "lazy"? Because in this case there wouldn't be any deformation but COMSOL still will try to calculate it, am I right? And which way is better so COMSOL even wouldn't calculate deformation of this body and what happens inside it?
Thank you,
Artem
And which way is not "lazy"? Because in this case there wouldn't be any deformation but COMSOL still will try to calculate it, am I right? And which way is better so COMSOL even wouldn't calculate deformation of this body and what happens inside it?
Thank you,
Artem