Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
ionisation air
Posted 2 apr 2013, 11:07 GMT-4 Low-Frequency Electromagnetics, Fluid & Heat, Computational Fluid Dynamics (CFD) Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hey.
I can not seem to model the ionization of air just using electro magnetism, temperature and pressure.
Can anyone advise me or send process?
Thank you.
I can not seem to model the ionization of air just using electro magnetism, temperature and pressure.
Can anyone advise me or send process?
Thank you.
1 Reply Last Post 2 apr 2013, 11:41 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Ivan,
it depends on the details. If you want to see the electric field and relate it to temperature and pressure dependant breakdown fieldstrength in air you can probably do it with electromagnetics.
If you want to model the ionization process itself it sounds like you may need the plasma module or implement your own equations. However I can't advise on that because I don't have the module.
--
Edgar J. Kaiser
www.emphys.com
it depends on the details. If you want to see the electric field and relate it to temperature and pressure dependant breakdown fieldstrength in air you can probably do it with electromagnetics.
If you want to model the ionization process itself it sounds like you may need the plasma module or implement your own equations. However I can't advise on that because I don't have the module.
--
Edgar J. Kaiser
www.emphys.com