Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Failed to find a solution due to the relative error

Posted 10 apr 2013, 13:01 GMT-4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Structural Mechanics Version 4.3a 1 Reply

Gobong Choi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am modelling piezoelectric sensor using MEMS module.
COMSOL was able to find the solution when I ran the frequency domain study with increment of 1HZ.
However, If I ran with smaller steps (ex. 0.1Hz or 0.2 Hz), I get the error massage saying that "the relative error is greater the the relative tolerance".
I have tried with finer mesh, but it didn't work.
I would like to know how to fix this problem.

Thanks!

Attachments:

1 Reply Last Post 11 apr 2013, 02:01 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 apr 2013, 02:01 GMT-4
Hi

nice model, ;)

I believe your issue is that you have no damping, and a very hiiigh Q factor, when you get too close to the resonance you get a numerical overflow, try using a log or power scale while approaching the resonance and skip just+/- something probably the solver will pass through, as for the larger steps

--
Good luck
Ivar
Hi nice model, ;) I believe your issue is that you have no damping, and a very hiiigh Q factor, when you get too close to the resonance you get a numerical overflow, try using a log or power scale while approaching the resonance and skip just+/- something probably the solver will pass through, as for the larger steps -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content