Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

electromechanics

Posted 18 apr 2013, 03:55 GMT-4 Structural Mechanics Version 4.2a, Version 4.3a 2 Replies

Angel Christina
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
Can anybody tell me how to apply vaccum of 70-mtorr around my model clamped-clamped beam resonator.Something like keeping my model inside a chamber of vaccum.
2 Replies Last Post 20 apr 2013, 00:57 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19 apr 2013, 15:46 GMT-4
Hi

you have the MEMS example in the library of Couette flow around a MEMS accelerometer that is worth a look. And probably there are some options, pre-cooked, in the microflow module (but I do not have that one)

--
Good luck
Ivar
Hi you have the MEMS example in the library of Couette flow around a MEMS accelerometer that is worth a look. And probably there are some options, pre-cooked, in the microflow module (but I do not have that one) -- Good luck Ivar
Angel Christina
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 apr 2013, 00:57 GMT-4
Hi,
Thanks for your suggestion.I will try what you said.
Hi, Thanks for your suggestion.I will try what you said.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content